Mechanics of Materials
-
Miniature mixed mode bending setup
Cohesive zone (CZ) approach is often used to describe the interface behavior in finite element (FE) predictive models to minimize...
Lees meer -
Self adaptive cohesive zone
The movie shows the opening profile of a cohesive zone modelled with 10 self-adaptive enriched elements in which the kink point of...
Lees meer -
Brain slice
Displacement field obtained with digital image correlation on a slice of brain tissue subjected to an acceleration pulse of...
Lees meer -
3D analysis of aluminum extrusion
Aluminum extrusion die
Lees meer -
3D velocity analysis of aluminum extrusion:
Velocity in the die
Lees meer -
Delamination in an IC back-end stack
A representative volume element of the back-end stack of an Integrated Circuit is loaded to failure. Delamination occurs at the...
Lees meer -
Fine-blanking simulation
Blanking is a forming process which is used to cut product out of sheet metal. Fine-blanking uses an additional counterpunch to...
Lees meer -
Score forming simulations
A knife is used to produce a score (indentation) in thin sheet metal. The simulation uses a coupled plasticity-damage model to...
Lees meer -
Simulation of Arcan test - crack growth and load-displacement response
Mixed-mode loading of a pre-cracked aluminium specimen results in crack growth at an angle. The growth direction and speed are...
Lees meer -
Simulation of Arcan test - evolution of damage and stress 2
Mixed-mode loading of a pre-cracked aluminium specimen results in crack growth at an angle. The growth direction and speed are...
Lees meer -
Tensile test on steel specimen
A dogbone-specimen made out of steel sheet material is loaded in tension. Plastic deformation localises in a neck and a crack is...
Lees meer